KOC West Kuwait Maintenance Contract Local Requirement - GULF SPIC
Electrician
Job Id :100185305
Description
1.Job Position: Auto Electrician.
Basic Salary: KWD 180.000/-
No of Positions Required: 1
Qualification Required: Have Secondary School plus two (2) Years’ Industrial Training Certificate.
Years of experience: 5 YEARS.
Field of Experience: Carryout maintenance repair of high voltage gas engine/flare ignition system and any other gas engine associated to electrical works.
Assist in the diagnosis of mechanical and auto electrical problems.
Maintain and services lead acid and nickel iron batteries.
Perform electrical work such as cutting, bending and installing conduit, modifying circuits and the like.
2.Job Position: Cable Jointer Mate.
Basic Salary: KWD 130.000/-
No of Positions Required: 1
Qualification Required: Secondary School plus two (2) Years’ Industrial Training Course with Trade Test Certificate or equivalent.
Years of experience: 5 YEARS.
Field of Experience: Must have some experience in assisting cable jointer or electrician.
Must have vast experience of making joints on different types and sizes of cables, both PVC, XLPE and paper-insulated for voltage up to 33 KV.
3.Job Position: Condition Monitoring Technician.
Basic Salary: KWD 360.000/-
No of Positions Required: 2.
Qualification Required: Shall hold a 03 Years Diploma in Mechanical Engineering from a reputed University/Institution
Years of experience: 6 YEARS.
Field of Experience: He shall have hands-on experience in condition monitoring of high-speed rotary machinery which includes centrifugal/reciprocating compressors, gas turbines, centrifugal/positive displacement pumps, fans, blowers etc.
4.Job Position: Control & Instrumentation Engineer.
Basic Salary: KWD 1,125.000/-
No of Positions Required: 1.
Qualification Required: Shall be a graduate of Bachelor of Science Degree in Control and Instrumentation Engineering or equivalent from a reputed University.
Years of experience: 10 YEARS.
Field of Experience: He shall have a post-qualification experience of minimum ten (10) Years in maintenance services of Energy/Oil & Gas /Petrochemical/Fertilizer/Refinery or such other utility facilities. He should have worked at least for the past eight (8) Years in similar position and sufficient knowledge in DCS, PLC, ESD, SCADA and other such Control systems.
5.Job Position: CS Welder.
Basic Salary: KWD 180.000/-
No of Positions Required: 4.
Qualification Required: Secondary School plus two (2) Years’ Industrial Training Course with Trade Test Certificate.
Years of experience: 5 YEARS.
Field of Experience: He should be experienced to work with carbon-steel, and chrome molly steel including pipe works and structural steel works.
6.Job Position: Electrical Fitter.
Basic Salary: KWD 170.000/-
No of Positions Required: 2.
Qualification Required: Secondary School plus two (2) Years’ Industrial Training Course with Trade Test Certificate or equivalent.
Years of experience: 5 YEARS.
Field of Experience: Dismantle, overhaul, re-assemble and align the motors of different sizes and horsepower in the fields. Dismantle, reassemble bus bars and components at switchgear panels and in HT switchgear panels. Repair and restore any components requiring skilled fitting. Must be able to use instruments such as vernier, micrometer, mercer gauge and the like.
7.Job Position: Electrical Technician.
Basic Salary: KWD 300.000/-
No of Positions Required: 2.
Qualification Required: Shall hold a 03 Years Diploma in Electrical Engineering from a reputed University/Institution Or Higher Secondary School (Science) with two (2) Years’ Industrial Training Certificate Or Secondary School with two (2) Years’ Industrial Training Certificate from a reputed University/Institution
Years of experience: 5 or 8 or 10 YEARS.
Field of Experience: Perform all the preventive maintenance work including routine preventive maintenance of switchgears and RMU units and transformers. Carry out trouble shouting of faulty power system networks and execute jobs assigned to him safely and timely. Shall know to use the testing instruments. Shall know to identify and locate the cable faults
by using appropriate instruments.
8.Job Position: Electronic Technician.
Basic Salary: KWD 300.000/-
No of Positions Required: 1.
Qualification Required: Shall hold a 03 Years Diploma in Instrumentation Engineering from a reputed University/Institution Or Higher Secondary School (Science) with two (2) Years’ Industrial Training Certificate Or Secondary School with two (2) Years’ Industrial Training Certificate from a reputed University/Institution
Years of experience: 5 or 8 or 10 YEARS.
Field of Experience: Diagnose problems or potential problems with card control systems like electronics and electrical cards.Perform maintenance on electronic instruments and control systems including microprocessor
based systems, Engine management systems PLC’s DCS’s, ESD, SCADA, fire and gas monitoring and protection relay system, Plant/Instrument air supply / drier packages, solar power-based wellhead surface safety systems, Rotating Equipment
9.Job Position: Fabricator.
Basic Salary: KWD 170.000/-
No of Positions Required: 4.
Qualification Required: Secondary School plus two (2) Years’ Industrial Training Course with Trade Test Certificate or equivalent.
Years of experience: 5 YEARS.
Field of Experience: He should be experienced to work with carbon-steel, stainless steel and chrome molly steel.
10.Job Position: Grit Blaster.
Basic Salary: KWD 130.000/-
No of Positions Required: 2.
Qualification Required: Secondary School plus two (2) Years’ Industrial Training Course with Trade Test Certificate or equivalent.
Years of experience: 5 YEARS
Field of Experience: Shall have experience in sweep blasting to SA 1 and Grit blasting to SA 2 ½, all types of piping, steel structures, storage tanks and vessels internally and externally.
11.Job Position: GRP Fitter.
Basic Salary: KWD 170.000/-
No of Positions Required: 1.
Qualification Required: Secondary School plus two (2) Years’ Industrial Training Course with Trade Test Certificate or equivalent.
Years of experience: 5 YEARS.
Field of Experience: Have practical experience in the repair, maintenance, fabrication and installation of GRP pipes (up to 40” dia.)
12.Job Position: HSE /Safety Engineer.
Basic Salary: KWD 1,125.000/-
No of Positions Required: 1.
Qualification Required: Shall be a graduate of Bachelor of Science Degree in Mechanical/Chemical/Electrical /Civil/Fire & Safety/Petroleum/Environment Engineering from a recognized and reputed University.
Years of experience: 8 YEARS.
Field of Experience: He should have worked at least for the past eight (8) Years’ in the similar position.
Must have successfully completed one or more HSE course(s) in any category of training in General Industrial Safety, Construction Safety, Environmental Management, Industrial Hygiene, ISO 14001, OHSAS 18001, NEBOSH, ICertOSH etc.
13.Job Position: Instrument Analyser Technician.
Basic Salary: KWD 300.000/-
No of Positions Required: 1.
Qualification Required: Shall hold a 03 Years Diploma in Instrumentation Engineering from a reputed University/Institution Or Higher Secondary School (Science) with two (2) Years’ Industrial Training Certificate Or Secondary School with two (2) Years’ Industrial Training Certificate from a reputed University/Institution
Years of experience: 5 or 8 or 10 YEARS.
Field of Experience: Diagnose problems or potential problems with card control systems like electronics and analysing control Systems.Perform maintenance on all types of analysing instruments like BSW, salt in crude, density,dew point and colorimeter etc.Diagnose problems or potential problems with control system like pneumatic, hydraulic,electronic, electrical and DCS related.
14.Job Position: Instrument Fitter.
Basic Salary: KWD 170.000/-
No of Positions Required: 3.
Qualification Required: Secondary School plus two (2) Years’ Industrial Training Course with Trade Test Certificate or equivalent.
Years of experience: 5 YEARS.
Field of Experience: Performs skilled instrument fitting duties for the installation, removal, repair and maintenance of a full range of instruments and ancillary equipment in Workshop or on Site.Must be skilled in the use of hand tools associated with the bench fittings and tube bending.Capable of using and converting standard units such as PSI, Hg. Inches, W.G., C, F Metric,Bars, m Bars and the like.Capable of using test equipment such as manometers, dead weight testers, comparators,test gauges and oil bath.
15.Job Position: Instrument Tech. (Field Preventive Maintenance)
Basic Salary: KWD 300.000/-
No of Positions Required: 4.
Qualification Required: Shall hold a 03 Years Diploma in Instrumentation Engineering from a reputed University/Institution Or Higher Secondary School (Science) with two (2) Years’ Industrial Training Certificate Or Secondary School with two (2) Years’ Industrial Training Certificate from a reputed University/Institution.
Years of experience: 5 or 8 or 10 YEARS.
Field of Experience: Perform maintenance on pneumatic, hydraulic and electronic instruments and control systems. including microprocessor based systems, engine management systems PLC’s DCS’s, ESD,SCADA, fire and gas monitoring and protection system, Plant/Instrument air supply/drier packages, solar power based wellhead surface safety systems, Rotating Equipment.Diagnose problems or potential problems with control system like pneumatic, hydraulic,electronic, and electrical and DCS related Instruments.Performs maintenance on all types of instruments like control valve, transmitters, switches,level/pressure/temperature/flow instruments etc.
16.Job Position: Instrument Technician.
Basic Salary: KWD 300.000/-
No of Posit